Use a block 1 1/2 inches thick, 2 3/4 inches wide, and 3 1/2 inches high for this figure. Figure 32. Draw the center line when the block is cut out.

Begin carving at the back as shown by the arrow in Figure 33; see Figure 34 for the detail. Carve ears. See Figure 35 for side construction, and Figure 36 for back.

Finish the head with the tongue protruding from the mouth, as in Figure 37.

Keep the figure rough; do not smooth to a high polish.

Follow color chart, Figure 38.

Figure 33

Figure 34

Figure 37

Figure 38

Try to capture the effect of eagerness on this dog carving, especially around the mouth and eyes. The long silky ears characteristic of the breed can be best represented by small indentations. This also applies to the body hair.