Steps

Tools

Order Of Exercise

1. Coping sawing

1. Pencil, rule, knife, and dividers

1. Square and true stock.

2. Half-cap joint

2. Coping saw and screw-driver

2. Lay out curves on sides and cut.

3. 3-4 inch chisel

3. Fit shelf in place and screw to sides.

4. Half-round file

5. Back saw and hammer

4. Fit back and front slats, screw and brad in place.

6. Try-square and marking gauge

7. Block and Jack plane

5. Sandpaper, stain, and polish.