Steps

Tools

Order Of Exercise

1. Fitting centre brace

1. Pencil, rule, knife, and dividers

1. Square and true stock.

2. Curve sawing

2. Turning saw and half-round file

2. Chamfer edges of top.

3. Beveling

3. 3-16 inch drill and bit stock

3. Lay out and cut outline of sides.

4. Marking gauge and try - square

4. Screw on side and top braces.

5. Cabinet scraper

5. Screw on top.

6. Block and Jack plane

6. Sandpaper, stain, and polish.