Twenty-Seventh Week - Model No. 6, (Continued)

Practice

1. Plane stock for roller.

(a) Plane stock square.

(b) Plane stock octagonal.

(c) Plane off edges.

2. Scrape and sandpaper.

Twenty-Eighth Week - Model No. 6, (Continued)

Practice

1. Draw outline for ends.

2. Cut outside of lines.

3. Cut slit in arms.

Twenty-Ninth Week - Model No. 6, (Continued)

Practice

1. Cut ends in roller to fit slit in arms.

2. Drill all holes.

Thirtieth Week - Model No. 6, (Continued)

Practice

1. Screw together.

2. Sandpaper.

3. Stain.

4. Varnish.

The remainder of the time may be used for unfinished work, or for any extra work that the student may wish to do.

Seventh Grade

First Week - Model No. 1

Practice

1. Plane stock square.

2. Gauge width and thickness.

Second Week - Model No. 1, (Continued)

Practice

1. Using knife line and dividers, draw outline of model. 2. Scrape and finish same. Gouge tray.

Third Week - Model No. 1, (Continued)

Practice

Finish gouging model.

Fourth Week - Model No. 1, (Continued)

Practice

1. Scrape and sandpaper pen-tray.

2. Finish pen-tray.

Students at this time must decide on the model which they wish to make for the coming year, and as far as possible the student must make sketch of same.

Fifth Week - Model No. 2

Practice

1. Saw out stock.

2. Plane working surface and edge on wood.

Sixth Week - Model No. 2, (Continued)

Practice

1. Square and true all stock to dimensions.

2. Nail three vertical uprights of holder together.

3. Draw outline of model on same.

4. Cut, using turning saw.

5. Cut sides by same method.

Seventh Week - Model No. 2, (Continued)

Practice

1. Finish outline.

2. Chamfer edges. Cut same, using back and turning saws.

Eighth Week - Model No. 2, (Continued)

Practice

1. Chamfer edges, using

(a) Chisel.

(b) Spokeshave.

(c) File.

2. Make covers for same.

Ninth Week - Model No. 2, (Continued)

Practice

Gouge out pen-tray. Cut hole in brush-broom-holder.

Tenth Week - Model No. 2, (Continued)

Practice

1. Bore holes for thimble and spool-holder. Cut pegs for same, or

2. Cut outline of brush-broom-holder, using

(a) Saw. (b) Chisel. (c) File.

Eleventh Week - Model No. 2, (Continued)

Practice

1. Finish all parts.

2. Sandpaper same.

Twelfth Week - Model No. 2, (Continued)

Practice

1. Glue together model.

2. Stain and shellac same.

Thirteenth Week - Model No. 3

Practice

Cut and square stock to dimensions.

Fourteenth Week - Model No. 3, (Continued)

Theory

Use of Plow. No. 46 Plane.

Practice

1. Cut and dado edges.

2. Miter corners, using miter box.

Fifteenth Week - Model No. 3, (Continued)

Practice

1. Glue and paste together, using

(a) Corrugated fasteners.

(b) Miter clamps.

Sixteenth Week - Model No. 3, (Continued)

Practice

Sandpaper and stain in mission.

The remainder of the year may be used in constructing special models; i. e., tie-racks, clothes-driers, stationery-holders, tabourets, book-racks, etc.

Eighth Grade

First Week - Model No. 1

Theory (Ten Minutes)

Talks on practical furniture construction. Design.

Practice

1. Saw out stock to approximate dimensions.

2. Begin squaring stock true to dimensions.

Second Week - Model No. 1, (Continued)

Theory (Ten Minutes)

Talks on practical furniture construction. Size for strength.

Practice

1. Finish planing stock square and true to dimensions.

2. Draw outline of ends. Lay out mortises.

Third Week - Model No. 1, (Continued)

Theory (Ten Minutes)

Talks on practical furniture construction.

(a) Wood used (best for staining).

(b) Staining (application).

Practice

1. Cut mortises in ends.

2. Draw outline, lay out tenons for shelf, and cut.

3. Make keys.

Fourth Week - Model No. 1, (Continued)

Theory (Ten Minutes)

Talks on practical furniture construction. Finishing, filling, wax, varnish.

Practice

1. Sandpaper stock.

2. Assemble the parts.

3. Stain, fill, varnish.

Fifth Week - Model No. 2

Theory (Ten Minutes)

Talks on practical furniture construction. Special tools and machinery.

Practice

1. Saw the stock for model.

2. Begin planing stock square and true to dimensions.

Sixth Week - Model No. 2, (Continued)

Theory (Ten Minutes)

Talks on practical furniture construction.

Various methods of making glued joints.

(a) Doweling.

(b) Tongue and grooving.

(c) Rubbed joints.

(d) Thickness of layer of glue.

Practice

1. Finish planing stock square and true to dimensions.

2. Chamfer edges if necessary. Lay out and cut ends.

3. Lay out and bore mortises and tenons.

Seventh Week - Model No. 2, (Continued)

Theory (Ten Minutes)

Making out a lumber order. Terms used.

Practice

1. Finish cutting joints.

2. Sandpaper model.

Eighth Week - Model No. 2, (Continued)

Theory (Ten Minutes)

Talk on cabinet design.

Practice

1. Stain model.

2. Fill

3. Wax

Ninth Week - Model No. 3

Theory (Ten Minutes)

Talk on building construction. Frame work.

Practice

1. Saw stock for model.

2. Begin planing stock square and true to dimensions.